Please use this identifier to cite or link to this item: http://hdl.handle.net/2440/101610
Type: Theses
Title: Thermoresponsive microgels as functional draw agents for forward osmosis desalination
Author: Hartanto, Yusak
Issue Date: 2016
School/Discipline: School of Chemical Engineering
Abstract: Forward osmosis (FO) process has recently been viewed as a low energy membrane separation technology for desalination process due to the absence of high hydraulic pressure. Typical FO desalination is a two-step process: water separation and water recovery, where the water recovery stage currently consumes more energy than the reverse osmosis (RO) process. There has been surge of interest to lower the energy requirement during water recovery process by finding suitable draw materials. One of the potential draw agents proposed for FO desalination is the thermoresponsive polymer hydrogel, which is able to absorb and release water reversibly by a slight change in the operational temperature. Unfortunately, the performance of these hydrogels as FO draw agents was very poor compared to other types of draw agents such as thermolytic solutes and linear polymers. As a result, further work in developing thermoresponsive polymer hydrogels as practical FO draw agent is necessary. In this thesis, thermoresponsive copolymer microgels were proposed and applied as FO draw agent for the first time. A series of copolymer microgels of N-isopropylacrylamide and acrylic acid was synthesized and evaluated as FO draw agent. The microgels show significantly improved performance than the previously synthesized bulk hydrogels due to their large surface areas. The microgels could generate high water flux up to 23.8 LMH and water recovery up to 55% depending on the concentration of acrylic acid in the microgels. The subsequent study investigated the effect of different acidic comonomers in the copolymer microgels on the FO water flux and water recovery performance. The results show that microgel with itaconic acid had the best overall performance among other acidic microgels due to the strong ionization of this comonomer as indicated by its pKₐ. The water flux and water recovery for this microgel are 44.8 LMH and 47.2 %, respectively. The apparent water flux of this microgel is 3.1 LMH. Thermoresponsive cationic copolymer microgels with different chemical structures of cationic comonomers were then synthesized and applied as FO draw agent to overcome long equilibrium swelling times of the acidic copolymer microgels. It was shown that microgel with 2-(diethylamino) ethyl methacrylate as a comonomer had the best performance among other cationic copolymer microgels. Furthermore, the shortest equilibrium swelling time, 30 minutes, among other microgels was achieved when this microgel was applied as FO draw agent. The water flux and water recovery for this microgel are 45.6 LMH and 44.8 %, respectively. The apparent water flux of this microgel is 5.5 LMH which is higher than the previously synthesized acidic microgels. In this study, Hansen solubility parameter was also proposed as a tool to predict the performance of the microgels as FO draw agents. The solubility parameters of the comonomers and the dissociation constants of the comonomers correlated well with the experimental results. Finally, different non-ionic copolymer microgels were synthesized and applied as FO draw agent. The microgel with acrylamide as a comonomer shows enhanced water recovery performance while maintaining relatively high water flux when used as FO draw agent. The water flux and water recovery for this microgel are 24.7 LMH and 78.7 %, respectively. The apparent water flux of this microgel is 6.1 LMH. This work will pave the way to design functional polymer materials as draw agent for FO desalination application.
Advisor: Dai, Sheng
Jin, Bo
Dissertation Note: Thesis (Ph.D.) (Research by Publication) -- University of Adelaide, School of Chemical Engineering, 2016.
Keywords: microgels
thermoresponsive
forward osmosis
desalination
water flux
water recovery
N-isopropylacrylamide
Provenance: Copyright material removed from digital thesis. See print copy in University of Adelaide Library for full text.
This electronic version is made publicly available by the University of Adelaide in accordance with its open access policy for student theses. Copyright in this thesis remains with the author. This thesis may incorporate third party material which has been used by the author pursuant to Fair Dealing exceptions. If you are the owner of any included third party copyright material you wish to be removed from this electronic version, please complete the take down form located at: http://www.adelaide.edu.au/legals
Appears in Collections:Research Theses

Files in This Item:
File Description SizeFormat 
01front.pdf351.64 kBAdobe PDFView/Open
02whole.pdf4 MBAdobe PDFView/Open
PermissionsLibrary staff access only702.99 kBAdobe PDFView/Open
RestrictedLibrary staff access only5.04 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.