1. Adelaide Research & Scholarship

Browsing "Mechanical Engineering publications" by Author Sarafraz, M.

Jump to: 0-9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
or enter first few letters:  
Showing results 1 to 20 of 37  next >
PreviewIssue DateTitleAuthor(s)
2015Application of spherical copper oxide (II) water nano-fluid as a potential coolant in a boiling annular heat exchangerNikkhah, V.; Sarafraz, M.; Hormozi, F.
2016Boiling heat transfer of alumina nano-fluids: role of nanoparticle deposition on the boiling heat transfer coefficientSalari, E.; Peyghambarzadeh, M.; Sarafraz, M.; Hormozi, F.
2016Comparatively experimental study on the boiling thermal performance of metal oxide and multi-walled carbon nanotube nanofluidsSarafraz, M.; Hormozi, F.
2014Convective boiling and particulate fouling of stabilized CuO-ethylene glycol nanofluids inside the annular heat exchangerSarafraz, M.; Hormozi, F.
2016Critical heat flux and pool boiling heat transfer analysis of synthesized zirconia aqueous nano-fluidsSarafraz, M.; Kiani, T.; Hormozi, F.
2018Demonstration of plausible application of gallium nano-suspension in microchannel solar thermal receiver: experimental assessment of thermo-hydraulic performance of microchannelSarafraz, M.; Arjomandi, M.
2012Development of a new correlation for estimating pool boiling heat transfer coefficient of MEG/DEG/water ternary mixtureSarafraz, M.; Alavi Fazel, S.; Hasanzadeh, Y.; Arabshamsabadi, A.; Bahram, S.
2012Enhancement of nucleate pool boiling heat transfer to dilute binary mixtures using endothermic chemical reactions around the smoothed horizontal cylinderSarafraz, M.; Peyghambarzadeh, S.; Alavifazel, S.
2012Enhancement of the pool boiling heat transfer coefficient using the gas injection into the waterSarafraz, M.; Peyghambarzadeh, S.; Alavi Fazel, S.
2016Experimental investigation on the pool boiling heat transfer to aqueous multi-walled carbon nanotube nanofluids on the micro-finned surfacesSarafraz, M.; Hormozi, F.
2012Experimental studies on nucleate pool boiling heat transfer to ethanol/MEG/DEG ternary mixture as a new coolantSarafraz, M.; Peyghambarzadeh, S.; Alavi Fazel, S.
2016Experimental studies on the stability of CuO nanoparticles dispersed in different base fluids: influence of stirring, sonication and surface active agentsKamalgharibi, M.; Hormozi, F.; Zamzamian, S.; Sarafraz, M.
2013Experimental study on subcooled flow boiling heat transfer to water-diethylene glycol mixtures as a coolant inside a vertical annulusSarafraz, M.; Peyghambarzadeh, S.
2014Experimental study on the influence of SO₂ gas injection to pure liquids on pool boiling heat transfer coefficientsSarafraz, M.; Hormozi, F.; Peyghambarzadeh, S.; Salari, E.
2014Experimental study on the thermal performance and efficiency of a copper made thermosyphon heat pipe charged with alumina-glycol based nanofluidsSarafraz, M.; Hormozi, F.
2018Flow boiling heat transfer to MgO-therminol 66 heat transfer fluid: experimental assessment and correlation developmentSarafraz, M.; Arya, H.; Saeedi, M.; Ahmadi, D.
2014Forced convective and nucleate flow boiling heat transfer to alumina nanofluidsSarafraz, M.; Hormozi, F.
2013Forced convective and subcooled flow boiling heat transfer to pure water and n-heptane in an annular heat exchangerPeyghambarzadeh, S.; Sarafraz, M.; Vaeli, N.; Ameri, E.; Vatani, A.; Jamialahmadi, M.
2018Heat transfer and fluid flow of MgO/ethylene glycol in a corrugated heat exchangerArya, H.; Sarafraz, M.; Arjomandi, M.
2019Heat transfer of oil/MWCNT nanofluid jet injection inside a rectangular microchannelJalali, E.; Akbari, O.; Sarafraz, M.; Abbas, T.; Safaei, M.
Showing results 1 to 20 of 37  next >