Please use this identifier to cite or link to this item:
Scopus Web of Science® Altmetric
Full metadata record
DC FieldValueLanguage
dc.contributor.authorNishimura, A.en
dc.contributor.authorZhao, X.en
dc.contributor.authorHayakawa, T.en
dc.contributor.authorIshida, N.en
dc.contributor.authorHirota, M.en
dc.contributor.authorHu, E.en
dc.identifier.citationInternational Journal of Photoenergy, 2016; 2016:1-12en
dc.description.abstractFe-doped TiO₂ (Fe/TiO₂) film photocatalyst was prepared by sol-gel and dip-coating process to extend its photoresponsivity to the visible spectrum. To promote the CO₂ reduction performance with the photocatalyst, some types of base materials used for coating Fe/TiO₂, which were netlike glass fiber and Cu disc, were investigated. The characterization of prepared Fe/TiO₂ film coated on netlike glass fiber and Cu disc was analyzed by SEM and EPMA. In addition, the CO₂ reduction performance of Fe/TiO₂ film coated on netlike glass disc, Cu disc, and their overlap was tested under a Xe lamp with or without ultraviolet (UV) light, respectively. The results show that the concentration of produced CO increases by Fe doping irrespective of base material used under the illumination condition with UV light as well as that without UV light. Since the electron transfer between two overlapped photocatalysts is promoted, the peak concentration of CO for the Fe/TiO₂ double overlapping is approximately 1.5 times as large as the Fe/TiO₂ single overlapping under the illumination condition with UV light, while the promotion ratio is approximately 1.1 times under that without UV light.en
dc.description.statementofresponsibilityAkira Nishimura, Xuyan Zhao, Takuya Hayakawa, Noriaki Ishida, Masafumi Hirota and Eric Huen
dc.rights© 2016 Akira Nishimura et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.en
dc.titleImpact of overlapping Fe/TiO₂ prepared by sol-gel and dip-coating process on CO₂ reductionen
dc.title.alternativeImpact of overlapping Fe/TiO(2) prepared by sol-gel and dip-coating process on CO(2) reductionen
dc.typeJournal articleen
dc.identifier.orcidHu, E. [0000-0002-7390-0961]en
Appears in Collections:Aurora harvest 3
Mechanical Engineering publications

Files in This Item:
File Description SizeFormat 
hdl_116264.pdfPublished Version16.13 MBAdobe PDFView/Open

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.