Please use this identifier to cite or link to this item: http://hdl.handle.net/2440/119874
Type: Thesis
Title: Theoretical and numerical modelling of the anisotropic behaviour of jointed rocks
Author: Zhou, Changtai
Issue Date: 2019
School/Discipline: School of Civil, Environmental and Mining Engineering
Abstract: In nature, various forms of rock anisotropy are widely pre-existing discontinuities such as bedding planes, joints, weak layers and cleavages. Rock anisotropic characteristics are in general critical for the stability of surface or underground rock excavations. The goal of this work is to investigate the anisotropic behaviour of jointed rock masses using theoretical and numerical modelling methods. In particular, discrete element modelling using flat jointed bonded particle model (FJM) was used in this research. A systematic micro-parameter calibration method for FJM was proposed first in this work to overcome the limitations of traditional approach, which essentially is a time-consuming tedious trial and error process. The relationships between the FJM micro-parameters and constitutive parameters, as well as macro-mechanical rock properties were first established through dimensionless analysis. Sensitivity and regression analyses were then conducted to quantify their relationships, using results from numerical simulations. The proposed method was demonstrated to be robust and effective based on the macro-mechanical property validation of four different types of rocks. The application of FJM to capture the load rate-dependent mechanical properties of rock materials was investigated. The results were cross-validated with experimental measurements, which indicated that FJM can model the dynamic behaviour of rocks from quasi-static to medium strain rate range. FJM, in combination with smooth joint model (SJM) used to model discontinuities, were then used to study the dynamic behaviour of rocks with a persistent joint at different orientations. A strength prediction model for dynamic UCS of a specimen containing a persistent joint at different orientations were proposed and the coefficients of the proposed equation were quantified based on numerical simulation results. The proposed model was shown to be capable of predicting VII the rate-dependent UCS of a jointed rock. Finally, the strength reduction of a jointed rock was further investigated using the statistical damage model approach based on the commonly used Weibull distribution, where the Jaeger’s and modified Hoek-Brown failure criteria were incorporated in the derived model. The proposed damage model was validated using published experimental data and numerical simulation results of FJM. Results indicated that parameter m only depends on strain parameter k, which is directly proportional to the increase of the failure strain, while parameter F0 is indirectly related to the strength of the jointed rock. In addition, joint stiffness can be easily incorporated in the proposed damage model, which has significant influence on the damage variable D, damage evolution rate Dr and rock mass deformation modulus. Outcomes of this research help us to understand better the influences of discontinuities on the mechanical behaviour of jointed rock masses.
Advisor: Xu, Chaoshui
Dissertation Note: Thesis (Ph.D.) -- University of Adelaide, School of Civil, Environmental & Mining Engineering, 2019
Keywords: discrete element method
bonded-particle model
loading rate
anisotropy
damage model
Provenance: This electronic version is made publicly available by the University of Adelaide in accordance with its open access policy for student theses. Copyright in this thesis remains with the author. This thesis may incorporate third party material which has been used by the author pursuant to Fair Dealing exceptions. If you are the owner of any included third party copyright material you wish to be removed from this electronic version, please complete the take down form located at: http://www.adelaide.edu.au/legals
Appears in Collections:Research Theses

Files in This Item:
File Description SizeFormat 
Zhou2019_PhD.pdf5.93 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.