Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.advisorRichards, Lindsay-
dc.contributor.advisorDudley, James-
dc.contributor.advisorRanjitkar, Sarbin-
dc.contributor.authorAIZahrani, Fawzia Salim-
dc.description.abstractStatement of problem: There is insufficient data on the failure of ETT restored with SFRC as a post and core restoration. Objectives: To comprehensively analyse the failure of ETT restored with SFRC as a post and core by conducting the following investigations: (1) analysis of the internal structures of SFRC posts and cores using micro-CT; (2) evaluation of failure load and failure mode of ETT restored with SFRC as a post and core after subjecting the teeth to fracture resistance testing and (3) analysis of the fractured surfaces of SFRC using SEM (fractography). Methods: Extracted premolars were divided randomly into three groups (15 teeth/group); control group of untreated teeth (C), ETT restored with SFRC posts and cores(XFP), and ETT restored with prefabricated FRC posts (PFP). Teeth in XFP group and PFP group received RCT and were restored with posts and cores and ceramic crowns. Qualitative and quantitative analyses of SFRC posts and cores (XFP group) were performed using a micro-CT scanner and associated software. All groups were thermocycled and subjected to a gradual cyclic fracture resistance test followed by failure mode evaluation. Fractured XFP specimens were imaged using SEM for fractographic analysis. Results: The control group had the highest mean failure load (1209.20N±126.65). The mean failure load of the XFP group (731.25N±86.33) was significantly higher (P <0.0001) than the mean failure load of PFP group (373.85N±64.21). While all teeth in XFP group had restorable failures, four specimens (27%) in PFP group had non-restorable root fractures. Voids were detected inside SFRC post and core build-ups and at the interface between the posts and dentine. Voids were distributed evenly inside SFRC posts. 88.2%±2.6 of the voids were smaller than 100μm3. For every 1% increase in the post voids, the mean failure load of teeth restored with SFRC posts increased by 53.9N. Fractographic analysis indicated that fibre orientation and distribution influenced the failure of ETT restored with SFRC posts. Conclusions: Endodontically-treated premolars restored with SFRC posts and cores demonstrated high failure load and favourable failure modes. The presence of voids and alteration in fibre orientation and distribution can affect the failure of ETT restored with SFRC posts and cores.en
dc.subjectfibre reinforced compositeen
dc.subjectpost and coreen
dc.subjectshort fibreen
dc.titleAn in vitro study of the failure of short-fibre reinforced composite post and core restoration of endodontically treated teethen
dc.contributor.schoolAdelaide Dental Schoolen
dc.provenanceThis electronic version is made publicly available by the University of Adelaide in accordance with its open access policy for student theses. Copyright in this thesis remains with the author. This thesis may incorporate third party material which has been used by the author pursuant to Fair Dealing exceptions. If you are the owner of any included third party copyright material you wish to be removed from this electronic version, please complete the take down form located at:
dc.description.dissertationThesis (Ph.D.) -- University of Adelaide, Adelaide Dental School, 2019en
Appears in Collections:Research Theses

Files in This Item:
File Description SizeFormat 
Alzahrani2019_PhD.pdf68.55 MBAdobe PDFView/Open

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.