Please use this identifier to cite or link to this item:
|Title:||An experimental verification of the inverse transient technique for leak detection|
|Citation:||6th Conference on Hydraulics in Civil 6th Conference on Hydraulics in Civil Engineering : The State of Hydraulics, proceedings, Hobart, Tasmania, 28-30 Nov 2001 / pp.373-380|
|Publisher:||THE INSTITUTION OF ENGINEERS, AUSTRALIA|
|Publisher Place:||11 NATIONAL CIRCUIT, BARTON, ACT|
|Conference Name:||Conference on Hydraulics in Civil Engineering (6th : 2001 : Hobart, Tas.)|
|Abstract:||Traditionally, leak detection in pipe networks has been performed using mass balance, steady state and acoustic methods. These methods have problems with accuracy and determinacy of leaks, are intrusive or are expensive to apply. In 1994 Liggett and Chen proposed the use of transients for the determination and location of leakage in a pipe network. In their method, the inverse transient method, the pressure head is measured at a number of locations in a pipe network that is experiencing a transient event. Then, using a transient model that incorporates leakage, different leak candidates are tested at various locations in the network. A least-squares minimisation is performed to fit the measured pressure heads to the modelled pressure heads and determine if a suspected leak is a true leak. This paper presents laboratory-based verification of the inverse transient method using the Levenberg-Marquardt and SCE minimisation algorithms.|
|Rights:||© 2001 The Institution of Engineers, Australia|
|Appears in Collections:||Aurora harvest 2|
Civil and Environmental Engineering publications
Environment Institute publications
Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.