Please use this identifier to cite or link to this item:
|Scopus||Web of Science®||Altmetric|
|Title:||Reduced NOₓ emissions and enhanced large scale turbulence from a precessing jet burner|
|Other Titles:||Reduced NOx emissions and enhanced large scale turbulence from a precessing jet burner|
|Citation:||Symposium (International) on Combustion, 1992; 24(1):1399-1405|
|Graham J. Nathan and R. E. (Sam) Luxton and John P. Smart|
|Abstract:||The performance characteristics of a Precessing Jet (PJ) burner, developed at the University of Adelaide, have been investigated in Furnace No. 1 of the International Flame Research Foundation firing natural gas with air pre-heated to 320°C. Results showed that the PJ burner, operating without air swirl, fuel staging or FGR, produces NOₓ emissions of about 57 ppm (dry, 3% O₂) which is comparable to the performance of a swirled flame operated at optimised conditions with either flue gas recirculation, FGR, or fuel staging. The emissions are significantly lower than the 134 ppm measured for the base-line swirl burner, but greater than the 37 ppm measured for the swirl burner operated with both FGR and fuel staging. The flame was investigated by means of in-flame measurement of temperature and species concentration using suction probes and by laser sheet visualisation and subsequently derived probability density functions of jet fluid concentration. These techniques show that the mixing and combustion processes are dominated by the presence of large scale structures. It is anticipated that a more complete understanding of the interaction between the large scale turbulence and the combustion process will lead to further improvements in the performance of the burner.|
|Rights:||Copyright status unknown|
|Appears in Collections:||Mechanical Engineering publications|
Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.